How to fix a print carriage jam on an hp 1610 printer

Greg · 05-18-2008, 01:08 AM

This is simpler than you'd think - it's due to the rubber "parkers" under the carriage's rest position being misaligned.

Solution:

Whilst Printer is on, remove power cord
Remove power cord from AC outlet
By hand, move print carriage to the left
Pull rubber "parkers" under where the carriage was fully towards you. Now move the carriage by hand left-to-right to ensure no further obstruction.
Connect power cord to printer
Connect power cord to AC outlet
Switch on.

You may need to re-align print heads at this point but the carriage jam will be solved.

It worked for me! (Though I ignored the bit about pulling the power cord. Living dangerously, I guess.) I did have to realign the print heads as well as clean them, but it worked!

I found this solution here and didn't want to lose it again.

I edited it to change references to "cartridge" (the ink bottle thingies) to say "carriage" (the holder for the ink bottle thingies).

Greg · 05-18-2008, 01:13 AM

Thought: My goodness, how printers have changed since around 1975 when we were installing solenoids in old typewriters and wiring up interfaces to IMSAI 8080 computers with smoking soldering irons!

Miros1 · 05-18-2008, 06:12 AM

Laser printers are fairly easy to unjam as well, assuming you didn't try printing on something that melts...

Basically, you open the top, lift out the toner cartridge, then look for the "lift here" or "pull here" tabs on the next piece down. Lift or pull as appropriate, and you should be able to extract the paper from the mechanism.

BTW, mother-in-law's roommate is getting a paper tray for Christmas...

Greg · 05-18-2008, 01:18 PM

Christmas? Unless I've totally lost contact with the universe, she has quite a while to wait!

Hokieman · 05-18-2008, 05:39 PM

Ye Gads! Thinking about Christmas already?? I'm still getting over the last one!

Miros1 · 05-18-2008, 05:58 PM

Well, her birthday is in January, so I missed it, and Christmas is the next major gift giving occasion.

Greg · 05-18-2008, 06:08 PM

That remains me of a time long ago when one of my buddies gave me a card for Christmas--a 4K dynamic RAM card for the S-100 bus!

Miros1 · 05-18-2008, 06:33 PM

Hubby gave me half a card once... i.e. half the money to buy a clock card for my Apple ][e!

Greg · 05-18-2008, 06:49 PM

Oh man! Those were the days! I'm glad they're gone!

Hokieman · 05-18-2008, 07:17 PM

Oh, I don't know. I kinda miss the days of the 8 bit 'puter and basic. I still have 2 Ataris (400 & 130XE) that I pull out every now and again just to remind my kids what computers used to be. My 6 year old loves some of the old games. What's funny is that these games are being released again and again for the newer game systems and the kids love 'em.

Miros1 · 05-18-2008, 08:08 PM

Somewhere, I have a simulator for Applesoft Basic...

Sita · 06-05-2008, 10:19 AM

our printer has completely sopped printing in black. Tried three new cartridges, nothing. Cleaned heads, realigned heads.... grrr

worst of it is it was an expensive printer, "business quality" bleugh. HP Business 2230.

Greg · 06-05-2008, 12:02 PM

I don't have a solution for that one, but a web search is likely to turn up lots of people who have had the same experience!

Miros1 · 06-05-2008, 12:53 PM

Weird. A new cartridge always fixed that for us.

TomP · 06-05-2008, 03:14 PM

Quote:

Originally Posted by Miros1

Hubby gave me half a card once... i.e. half the money to buy a clock card for my Apple ][e!

What's a clock card??

Sita · 06-05-2008, 04:12 PM

Quote:

Originally Posted by Greg

I don't have a solution for that one, but a web search is likely to turn up lots of people who have had the same experience!

Yes, am hoping so.

Greg · 06-05-2008, 05:18 PM

Quote:

Originally Posted by TomP

What's a clock card??

Once upon a time, personal computers didn't have built-in clocks that kept track of the time. You had to buy a separate add-on card if you didn't want to have to set the time every time you booted up.

Hokieman · 06-05-2008, 06:08 PM

Sita, I looked up your printer on HP's site. It has separate print heads for your model under the supplies listing. From your desciption, it sounds like you need to replace the black one. Sometimes, you can clean the head too. It has itty-bitty holes that the ink passes through that can get clogged up. Just shaking it sometimes works too.

We have an HP plotter at work that has the separate print heads and usually just pulling one, shaking it and reinstalling gets the printer going again, at least for a short while. Eventually, we have to replace the heads. Generally, about every 6 months or so, but volume sometimes makes it sooner.

Greg · 06-05-2008, 11:40 PM

Are the print heads seperate from the ink cartridges?

Miros1 · 06-06-2008, 04:07 AM

That's what it sounds like!

05-18-2008, 01:08 AM	#1
Greg Da Guy Wut Owns Dis Joint Join Date: Mar 2007 Location: Texas Posts: 3,566	How to fix a print carriage jam on an hp 1610 printer This is simpler than you'd think - it's due to the rubber "parkers" under the carriage's rest position being misaligned. Solution: Whilst Printer is on, remove power cord Remove power cord from AC outlet By hand, move print carriage to the left Pull rubber "parkers" under where the carriage was fully towards you. Now move the carriage by hand left-to-right to ensure no further obstruction. Connect power cord to printer Connect power cord to AC outlet Switch on. You may need to re-align print heads at this point but the carriage jam will be solved. It worked for me! (Though I ignored the bit about pulling the power cord. Living dangerously, I guess.) I did have to realign the print heads as well as clean them, but it worked! I found this solution here and didn't want to lose it again. I edited it to change references to "cartridge" (the ink bottle thingies) to say "carriage" (the holder for the ink bottle thingies). __________________ Who are all these people and what do they know? Last edited by Greg : 05-18-2008 at 01:16 AM.

05-18-2008, 01:13 AM	#2
Greg Da Guy Wut Owns Dis Joint Join Date: Mar 2007 Location: Texas Posts: 3,566	Thought: My goodness, how printers have changed since around 1975 when we were installing solenoids in old typewriters and wiring up interfaces to IMSAI 8080 computers with smoking soldering irons! __________________ Who are all these people and what do they know?

05-18-2008, 06:12 AM	#3
Miros1 Goddess for Life Join Date: Mar 2007 Location: NY State Posts: 3,303	Laser printers are fairly easy to unjam as well, assuming you didn't try printing on something that melts... Basically, you open the top, lift out the toner cartridge, then look for the "lift here" or "pull here" tabs on the next piece down. Lift or pull as appropriate, and you should be able to extract the paper from the mechanism. BTW, mother-in-law's roommate is getting a paper tray for Christmas... __________________ A game that horrible Odessa-person introduced me to: http://www.puzzlepirates.com/?affili...163251&lang=en I'm spreading the addiction by corrupting all my friends (and attempting to make in-game money when they try the game).

05-18-2008, 01:18 PM	#4
Greg Da Guy Wut Owns Dis Joint Join Date: Mar 2007 Location: Texas Posts: 3,566	Christmas? Unless I've totally lost contact with the universe, she has quite a while to wait! __________________ Who are all these people and what do they know?

05-18-2008, 05:58 PM	#6
Miros1 Goddess for Life Join Date: Mar 2007 Location: NY State Posts: 3,303	Well, her birthday is in January, so I missed it, and Christmas is the next major gift giving occasion. __________________ A game that horrible Odessa-person introduced me to: http://www.puzzlepirates.com/?affili...163251&lang=en I'm spreading the addiction by corrupting all my friends (and attempting to make in-game money when they try the game).

05-18-2008, 05:39 PM	#5
Hokieman Solar Max Join Date: Nov 2007 Location: Las Vegas Posts: 520	Ye Gads! Thinking about Christmas already?? I'm still getting over the last one!

05-18-2008, 06:08 PM	#7
Greg Da Guy Wut Owns Dis Joint Join Date: Mar 2007 Location: Texas Posts: 3,566	That remains me of a time long ago when one of my buddies gave me a card for Christmas--a 4K dynamic RAM card for the S-100 bus! __________________ Who are all these people and what do they know?

05-18-2008, 06:33 PM	#8
Miros1 Goddess for Life Join Date: Mar 2007 Location: NY State Posts: 3,303	Hubby gave me half a card once... i.e. half the money to buy a clock card for my Apple ][e! __________________ A game that horrible Odessa-person introduced me to: http://www.puzzlepirates.com/?affili...163251&lang=en I'm spreading the addiction by corrupting all my friends (and attempting to make in-game money when they try the game).

05-18-2008, 06:49 PM	#9
Greg Da Guy Wut Owns Dis Joint Join Date: Mar 2007 Location: Texas Posts: 3,566	Oh man! Those were the days! I'm glad they're gone! __________________ Who are all these people and what do they know?

05-18-2008, 07:17 PM	#10
Hokieman Solar Max Join Date: Nov 2007 Location: Las Vegas Posts: 520	Oh, I don't know. I kinda miss the days of the 8 bit 'puter and basic. I still have 2 Ataris (400 & 130XE) that I pull out every now and again just to remind my kids what computers used to be. My 6 year old loves some of the old games. What's funny is that these games are being released again and again for the newer game systems and the kids love 'em.

05-18-2008, 08:08 PM	#11
Miros1 Goddess for Life Join Date: Mar 2007 Location: NY State Posts: 3,303	Somewhere, I have a simulator for Applesoft Basic... __________________ A game that horrible Odessa-person introduced me to: http://www.puzzlepirates.com/?affili...163251&lang=en I'm spreading the addiction by corrupting all my friends (and attempting to make in-game money when they try the game).

06-05-2008, 10:19 AM	#12
Sita Solar Max Join Date: Mar 2007 Location: England Posts: 371	our printer has completely sopped printing in black. Tried three new cartridges, nothing. Cleaned heads, realigned heads.... grrr worst of it is it was an expensive printer, "business quality" bleugh. HP Business 2230.

06-05-2008, 12:02 PM	#13
Greg Da Guy Wut Owns Dis Joint Join Date: Mar 2007 Location: Texas Posts: 3,566	I don't have a solution for that one, but a web search is likely to turn up lots of people who have had the same experience! __________________ Who are all these people and what do they know?

06-05-2008, 12:53 PM	#14
Miros1 Goddess for Life Join Date: Mar 2007 Location: NY State Posts: 3,303	Weird. A new cartridge always fixed that for us. __________________ A game that horrible Odessa-person introduced me to: http://www.puzzlepirates.com/?affili...163251&lang=en I'm spreading the addiction by corrupting all my friends (and attempting to make in-game money when they try the game).

06-05-2008, 06:08 PM	#18
Hokieman Solar Max Join Date: Nov 2007 Location: Las Vegas Posts: 520	Sita, I looked up your printer on HP's site. It has separate print heads for your model under the supplies listing. From your desciption, it sounds like you need to replace the black one. Sometimes, you can clean the head too. It has itty-bitty holes that the ink passes through that can get clogged up. Just shaking it sometimes works too. We have an HP plotter at work that has the separate print heads and usually just pulling one, shaking it and reinstalling gets the printer going again, at least for a short while. Eventually, we have to replace the heads. Generally, about every 6 months or so, but volume sometimes makes it sooner.

06-05-2008, 11:40 PM	#19
Greg Da Guy Wut Owns Dis Joint Join Date: Mar 2007 Location: Texas Posts: 3,566	Are the print heads seperate from the ink cartridges? __________________ Who are all these people and what do they know?

06-06-2008, 04:07 AM	#20
Miros1 Goddess for Life Join Date: Mar 2007 Location: NY State Posts: 3,303	That's what it sounds like! __________________ A game that horrible Odessa-person introduced me to: http://www.puzzlepirates.com/?affili...163251&lang=en I'm spreading the addiction by corrupting all my friends (and attempting to make in-game money when they try the game).